[shortdesc]
192 Vdc Lead-Acid External Battery Pack, 3U Rackmount, Smart-UPS On-Line SRT Compatible, Uses APCRBC140 (RBC Qty: 2
[/shortdesc]
[properties]
| Brand |
APC by Schneider Electric |
| Model |
SRT192RMBP |
| Product Type |
External Battery Pack |
| Form Factor |
Rackmount 3U |
| Dimensions (H x W x D |
5.1" x 17.008" x 26.88" (13 x 43.2 x 68.27 cm |
| Weight |
200.6 lb (91 kg |
| Color |
Black |
| Number of Rack Units |
3U |
| Mounting Mode |
Rack-mounted or stand-alone stack |
| Cooling |
Not specified |
[/properties]
[specifications]
| Battery Type |
Lead-Acid |
| Battery Voltage |
192 V |
| RBC Quantity |
2 |
| Replacement Battery |
APCRBC140 |
| Battery Slots |
0 (empty |
| Included Battery Modules |
0 |
| Operating Temperature |
0–40 °C (32–104 °F |
| Storage Temperature |
-15–45 °C (5–113 °F |
| Operating Humidity |
0–95% non-condensing |
| Storage Humidity |
0–95% non-condensing |
| Operating Altitude |
0–10,000 ft |
| Storage Altitude |
0–50,000 ft |
| Compliance |
OSHPD, RoHS, REACh, WEEE |
| Warranty |
2 years repair or replace |
[/specifications]
[accessories]
| Installation Guide |
Included in the box |
| Warranty Card |
Included in the box |
[/accesories]
Dimensions: 5.1 in H × 17.008 in W × 26.88 in D; Weight: 200.6 lb (91 kg • Operating: 0–40 °C, 0–95% RH (non-cond., 0–10,000 ft • Mounting: Rack-mounted / stand-alone stack • Color: Black • Standard: OSHPD • Battery voltage: 192 Vdc • Included battery modules: 0 • Replacement battery: APCRBC140; RBC quantity: 2 • Provided: Installation guide.
Overview
The APC SRT192RMBP is a 192 Vdc, 3U rack external battery pack engineered to extend runtime for compatible Smart-UPS On-Line SRT installations. Its lead-acid design, rack-mountable chassis, and OSHPD conformance make it a robust choice for environments that require predictable power autonomy and clean integration into existing racks.
Key Features & Benefits
-
192 Vdc Architecture – Matches the SRT battery bus for seamless runtime expansion.
-
3U Rackmount Form Factor – Efficient footprint that fits standard racks or stacks as a stand-alone battery set.
-
Lead-Acid Design – Proven chemistry for dependable capacity across typical data-room conditions.
-
Serviceability – Uses APCRBC140 (RBC qty 2 for straightforward maintenance planning.
-
OSHPD Conformance – Aligns with listed compliance requirements.
Technical Deep Dive
Battery System & Topology: The pack delivers a nominal 192 Vdc battery bus built from lead-acid modules compatible with Smart-UPS On-Line SRT systems. This alignment allows the UPS to recognize and utilize added capacity for extended hold-up during outages.
Form Factor & Integration: A 3U chassis supports rack-mount deployment or stand-alone stacking, enabling clean cabling and straightforward service access within constrained racks. Physical dimensions (5.1″ × 17.008″ × 26.88″ and the 91 kg mass should be considered for rail selection and handling.
Operating Envelope: The design supports 0–40 °C operating temperature, up to 95% RH (non-condensing, and up to 10,000 ft altitude—parameters that help maintain predictable capacity and service life within standard IT environments.
Ideal Applications
- Smart-UPS On-Line SRT installations requiring extended runtime
- Rack environments allocating 3U for battery expansion
- Sites operating within 0–40 °C and up to 95% RH non-condensing
Frequently Asked Questions (FAQs
Q1: What is the installation/form factor?
A: It is a 3U rack-mounted external battery pack and may also be used as a stand-alone battery stack.
Q2: How much runtime does it add?
A: This pack extends runtime by adding battery capacity to a compatible SRT UPS. Actual runtime depends on UPS model, load, and the number of battery packs attached.
Q3: What batteries does it use and are they included?
A: It uses APCRBC140 with an RBC quantity of 2, and the unit ships with **0** battery modules installed.
