[shortdesc]
- ACX2200
- AC version
- 1 RU
- SyncE/1588
- Temperature hardened
- Passive;y cooled
- 2 x GE SFP+
- 2 x GE SFP
- 4 x GE Combo (SFP or RJ45)
- 4 x GE RJ45
- Redundant AC power supply
[/shortdesc]
[properties]
| Properties |
Juniper ACX2200-AC |
| Description |
ACX2200 unit, 2x10GbE SFP+, 4xGbE copper, 4xGbE combination (copper or fiber), 2xGbE SFP, 1 U, ETSI 300, redundant AC power, temperature hardened, passively cooled, Junos OS (optics sold separately) |
| Product Family |
ACX2200 Series |
| Product Type |
Router |
| Built-In Interface Options |
| GbE (copper) |
4 |
| GbE (combo) |
4 |
| GbE (SFP) |
2 |
| 10GbE (SFP+) |
2 |
| Console port |
RJ-45 connector |
| Management Ethernet port |
RJ-45 connector |
| Dimension (WxHxD) |
17.5 x 1.75 x 9.4 in (44.5 x 4.4 x 24 cm) |
| Weight (lb/kg) fully configured |
8.3 lb (3.77 kg) |
| Power |
90 to 240 VAC
|
| Maximum power draw |
70 W |
| Rack Unit |
1 U |
[/properties][specifications]
| Specifications |
ACX2200-AC |
| System Throughput |
Up to 60 Gbps |
| Operating temperature |
-40° to 149° F (-40° to 65° C) |
| Humidity |
95% RH noncondensing |
| Platform Features |
| Layer 2 |
IEEE 802.3 bridging
IEEE 802.1q
IEEE 802.1ad (Q-in-Q)
VLAN id manipulation for outer/inner: swap/pop/push
Rapid Spanning Tree Protocol (RSTP)/VLAN Spanning Tree Protocol (VSTP)/Multiple Spanning Tree Protocol (MSTP)
Link Aggregation Control Protocol (LACP)
Enhanced load balancing based on L2-L4 header info
Link Layer Discovery Protocol (LLDP)
Layer 2 bridge protocol data unit (BPDU) tunneling/MAC rewrite |
| Layer 3 |
IPv4
IPv6
RPF
Equal-cost multipath (ECMP)
Enhanced load balancing based on L2-L4 header info
OSPF
IS-IS
BGP
Indirect/composite next hop |
| MPLS and Seamless MPLS |
RSVP
LDP
Path Computation Element Protocol (PCEP)
RSVP-TE
BGP-LU
LDP-RSVP
RSVP fast reroute (FRR) |
| Services |
IEEE 802.3 bridge domain
PWE (T-LDP)
L2VPN (BGP)
Layer 3 VPN
Integrated routing and bridging (IRB)
Stateless filters L2-L4
Circuit emulation SAToP/CESoPSN/ATM o MPLS |
| Class of Service (CoS) |
8 queues per port with schedulers and shaping
Classification based on 802.1p, DiffServ code point(DSCP), IP-precedence, Exp bit
Single-rate policer ingress/egress
Two-rate three-color policer ingress/egress
Per-Port Egress Shaping |
| OAM and SLA Management |
Bidirectional Forwarding Detection (BFD)
Connectivity fault management (CFM)
Y.1731
RFC2544
TWAMP |
| Multicast |
Protocol Independent Multicast (PIM)
Internet Group Management Protocol (IGMP)
IGMP snooping |
| Timing and Sync |
BITS/1pps/10MHz
1588v2 BC
1588v2 over IP
1588v2 over Ethernet
Synchronous Ethernet
Hybrid mode |
| Security |
L2 storm control |
| Configuration, Management and Automation |
CLI
NETCONF
NMP v2/v3
SLAX/Python on-box scripting tools
ZTD
YANG |
| Safety Approvals |
CAN/CSA-C22.2 No. 60950-1
UL 60950-1
EN 60950-1
IEC 60950-1CB Scheme
EN 60825-1 |
| EMC |
AS/NZS CISPR22 Class A
EN55022 Class A
VCCI Class A
FCC Part 15 Class A
IECS-003 Issue 4
BSMI CNS 13438 and NCC C6357 Taiwan Radiated Emissions
KN 22, Class A
CISPR 32/EN55032: 2012 European Radiated Emissions Class A
EN-61000-4-6 Low Frequency Common Immunity
EN-61000-4-11 Voltage Dips and Sags
CISPR 24/EN55024 Information Technology Equipment Immunity Characteristics |
| ETSI (European Telecommunications Standardization Institute) |
EN 300 386 V1.6.1 Telecommunication Network Equipment, Electromagnetic Compatibility Requirements
ETSI EN 300 019-2-3 (2003) Stationary Use at Weather Protected Locations, Class T3.4
ETSI EN 300 019-2-1 (2000) Storage, Class T1.2
ETSI EN 300 019-2-2 (1999) Transportation, Class T2.3
ETSI 300753 (1997) Acoustic Noise Emitted by Telecommunications Equipment |
| NEBS |
SR-3580 NEBS Criteria Levels (Level 3 Compliance)
GR-63-CORE: NEBS, Physical Protection
GR-1089-CORE: EMC and Electrical Safety for Network Telecommunications Equipment (Issue 6 compliant)
GR-3108-CORE: Generic Requirements for Network Equipment in the Outside Plant (OSP) |
| Telecomm Compliance |
Device management: NETCONF, CLI, SNMP v1/v2/v3
End-to-end provisioning of E-Line, emulated LAN (ELAN), Layer 3 VPN (L3VPN), OAM, class of service (CoS)
Device and service-level fault management
Device and service-level performance management |
| Metro Ethernet Forum (MEF) |
MEF CE2.0 compliant |
[/specifications][accesories]
| Accessories |
| PKG-1U-ACXS |
Package Spare for ACX 1RU Chassis |
| RACK-MNT-1RU-19-S |
ACX Series 1 RU 19" Mounting Bracket" |
| RACK-MNT-1RU-23-S |
ACX Series 1 RU 23" Mounting Bracket" |
| CBL-PWR-C15M-HITEMP-US |
Power Cord, AC, C15M |
[/accesories]
Juniper ACX2200 Universal Metro Router is a compact, Ethernet only, environmentally hardened router with fanless passive cooling. It has a fixed port configuration that includes four copper 10/100/1000 Mbps interfaces, four combination copper/fiber GbE ports, two GbE SFP ports, and two 10 GbE SFP+ ports, making it ideal for IP-RAN deployments.
